You should get some overallswalsh123 wrote:Aye tis me
Why Asks suspiciously
Red Dx......Back to the drawing board....again -_-
- widowmaker
- Moderator
- Posts: 8097
- Joined: Wed Jul 04, 2007 10:46 pm
Re: Red Dx D15B....Ashamed Vtec maybe going in
No longer on the 'sucker list'
- joe f
- Lvl6! Danger to manifold!
- Posts: 1656
- Joined: Sun May 23, 2010 11:14 am
- Location: Dorking, Surrey
Re: Red Dx D15B....Ashamed Vtec maybe going in
Yeeah I only got them last Saturday. £50 for 2 mint escort rst ones
I've just bolted some box section to the bottom, then welded the rail to that. The rail closest the outside of the car is the bitch, the other one just bolts straight to the bottom of the seat.
But now the box section is wedged against the floor so it won't really move.
Need to set a bit of time aside to do them, was a bit of a rushed jib.
I've just bolted some box section to the bottom, then welded the rail to that. The rail closest the outside of the car is the bitch, the other one just bolts straight to the bottom of the seat.
But now the box section is wedged against the floor so it won't really move.
Need to set a bit of time aside to do them, was a bit of a rushed jib.
Re: Red Dx D15B....Ashamed Vtec maybe going in
Haha i have some but...
I cant wear them fully as im tall it pulls the legs up, so it look like im wearing 3 qaurter overalls
Anyway eddie boy exam in morning so im aoff banter shall continue tomorrow im sure
I cant wear them fully as im tall it pulls the legs up, so it look like im wearing 3 qaurter overalls
Anyway eddie boy exam in morning so im aoff banter shall continue tomorrow im sure
Ah cool man good price, and get some pics up of how you got the to fit and add to the How to section. Then ill know how to do mine with just 4g railsjoe f wrote:Yeeah I only got them last Saturday. £50 for 2 mint escort rst ones
I've just bolted some box section to the bottom, then welded the rail to that. The rail closest the outside of the car is the bitch, the other one just bolts straight to the bottom of the seat.
But now the box section is wedged against the floor so it won't really move.
Need to set a bit of time aside to do them, was a bit of a rushed jib.
1990 Civic VT Daily
1991 civic GL (track toy)
1991 Shuttle (To be "sensible" daily project)
- widowmaker
- Moderator
- Posts: 8097
- Joined: Wed Jul 04, 2007 10:46 pm
Re: Red Dx D15B....Ashamed Vtec maybe going in
Good luck in the Exam, time for a last minute cram
No longer on the 'sucker list'
Re: Red Dx D15B....Ashamed Vtec maybe going in
Cheers man, yep gonna get up early cram for hour before it
1990 Civic VT Daily
1991 civic GL (track toy)
1991 Shuttle (To be "sensible" daily project)
Re: Red Dx D15B....Ashamed Vtec maybe going in
I easily enough get you another Z6 Jonny*Jonnyg* wrote:bitch.
1990 Civic VT Daily
1991 civic GL (track toy)
1991 Shuttle (To be "sensible" daily project)
Re: Red Dx D15B....Ashamed Vtec maybe going in
Good boy :p ..
Re: Red Dx D15B....Ashamed Vtec maybe going in
Dont make me ban you
1990 Civic VT Daily
1991 civic GL (track toy)
1991 Shuttle (To be "sensible" daily project)
Re: Red Dx D15B....Ashamed Vtec maybe going in
vtec and bike carbs
89' civic EF-3 Si
96' INTEGRA Xi-G 4 door
03' vauxhall corsa sxi 1.7 DTi
96' INTEGRA Xi-G 4 door
03' vauxhall corsa sxi 1.7 DTi
- joe f
- Lvl6! Danger to manifold!
- Posts: 1656
- Joined: Sun May 23, 2010 11:14 am
- Location: Dorking, Surrey
Re: Red Dx D15B....Ashamed Vtec maybe going in
From what I can see I've got the fan switch where that plug is.. Can't see it very well though.
Re: Red Dx D15B....Ashamed Vtec maybe going in
Hehe yep that should get a#some looks at JAEbryan wrote:vtec and bike carbs
Awesome cheers Joe i thought it would be there, going to see if i can get a new switch i dont think the D15 one will come out without a fightjoe f wrote:From what I can see I've got the fan switch where that plug is.. Can't see it very well though.
1990 Civic VT Daily
1991 civic GL (track toy)
1991 Shuttle (To be "sensible" daily project)
Re: Red Dx D15B....Ashamed Vtec maybe going in
New brakes !
I bought these from Ed a while ago just didnt get around to uploading pics
262mm grooved discs need a good clean up but nothing a wire drill bit wont fix
Goodridge brake lines
Vt calipers
Should help out abit on track, not that i had to use the brakes much
Also i ordered some new silicone hose yesterday for the bike carbs as the original ones had perished, bit boring going for plain black hose but coloured stuff just ends up changing colour and looking rubbish.
Also did some work the Z6
Took the waterpumpofff to check it absolutely fine no rust on it so that went back on. Sign of well looked after engine
Then wire drill bit to get muck off and paint as i hate mucky engines
laquared the solenoid just tp try it out
Rocker cover off very clean
Thermostat looksto be ingood nick
Fitted everything back onto the block and cleaned
New cambelt
rocker cover painted and laquared
D15 nearly ready to come out
driveshafts out wiring all disconnected basically just have to pul it out tomorrow
I bought these from Ed a while ago just didnt get around to uploading pics
262mm grooved discs need a good clean up but nothing a wire drill bit wont fix
Goodridge brake lines
Vt calipers
Should help out abit on track, not that i had to use the brakes much
Also i ordered some new silicone hose yesterday for the bike carbs as the original ones had perished, bit boring going for plain black hose but coloured stuff just ends up changing colour and looking rubbish.
Also did some work the Z6
Took the waterpumpofff to check it absolutely fine no rust on it so that went back on. Sign of well looked after engine
Then wire drill bit to get muck off and paint as i hate mucky engines
laquared the solenoid just tp try it out
Rocker cover off very clean
Thermostat looksto be ingood nick
Fitted everything back onto the block and cleaned
New cambelt
rocker cover painted and laquared
D15 nearly ready to come out
driveshafts out wiring all disconnected basically just have to pul it out tomorrow
1990 Civic VT Daily
1991 civic GL (track toy)
1991 Shuttle (To be "sensible" daily project)
Re: Red Dx D15B....Ashamed Vtec maybe going in
nice one ethan.
mint engine by the looks of it.
fluids changed regularly id say.
what gearbox you fitting?
mint engine by the looks of it.
fluids changed regularly id say.
what gearbox you fitting?
89' civic EF-3 Si
96' INTEGRA Xi-G 4 door
03' vauxhall corsa sxi 1.7 DTi
96' INTEGRA Xi-G 4 door
03' vauxhall corsa sxi 1.7 DTi
Re: Red Dx D15B....Ashamed Vtec maybe going in
Thanks Bryan
yeah engine looks to be in great nick, it was going to have been though came out of Daz's Ek Has 174,000 miles on it aswell
Im going to fit the one from the D15 L3 box, but might not get it fitted for a while as i want to get an uprated clutch ideally but there expensive and the clutch in it has only 100miles at the very most probably more like 60. but its only designed for 90 bhp so not sure how long it would last in the z6
yeah engine looks to be in great nick, it was going to have been though came out of Daz's Ek Has 174,000 miles on it aswell
Im going to fit the one from the D15 L3 box, but might not get it fitted for a while as i want to get an uprated clutch ideally but there expensive and the clutch in it has only 100miles at the very most probably more like 60. but its only designed for 90 bhp so not sure how long it would last in the z6
1990 Civic VT Daily
1991 civic GL (track toy)
1991 Shuttle (To be "sensible" daily project)