Exhaust on Civic Shuttle what fits???

[Shuttle_Richy]

Hey guys does anyone know of any full systems that fit a 91 1.4 shuttle??? wouldn't mind the SRS system from H-tune but the standard exhaust is straight down middle of car where as that one has the bend in middle by looks of photo. looking to spend £400 what would you recommend??

[Ben_theEFking]

Go for a custom system mate. At least that way it will fit spot on.

[Gizmo]

no after market systems exist for the shuttle. its either OEM or Custom/ Home made.

I made mine for about £120, Full Mandrel True 2" ID stainless Steel

[Dave]

I would think that sedan ones and therefore hatch ones would fit the GL shuttle no worries.
The 4WD is a custom job, but I have a niggling feeling that the floorplan on the GL shuttle is even the same part as the sedan.

[Gizmo]

The shuttle is under axle at a 45 degree. Hatch sedan is over axel 90 degree

[Dave]

I believe that's only the case so that Honda could use the same OEM exhaust on both the GL and the 4WD.
When the axles aren't there, I don't believe there is anything in the way of going the 90 deg route.

Have you had a good look under a GL Giz and it's a no go ?

[Gizmo]

Im sure center pipes differ from GL to 4WD to clear the Prop

[Chapman]

ill check mine tomorrow, and get some pics as its gona be up in the air

[Gizmo]

Neds system tucks well up into the tunnel so he told me. For the lows.

The verticle angles in the system arnt needed anyways. They only seem to be there for aesthetic reasons to drop the exhaust into view behind the rear bumper