where you can get so usedvtecmossy wrote:U and me both Arc sold man sorry ,
My Si Ef-3 h22a hatch build
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Tbh no idea found mine on Honda-haven.com was about 225 euro used and shipped to me hard enough got but ireland was flooded wit jap imports so lots of nice bits about tbh.ttp wrote:where you can get so usedvtecmossy wrote:U and me both Arc sold man sorry ,
Re: My ec-8 h22a build Very pic heavy lil bits
Not done a whole lot to this lately but heres what i did sort before i picked up a new ek4 saloon for runabout needs nct/mot so been sorting that then i`ll get back to this anyways ordered a custom clutch cable from cable craft bout 30 euro ready to collect today , Finished the strut brace
Ran the rest of the brake lines
Fitted the freshly painted shock forks to the ohlins old ones where in bad shape
Also painted the Rear Anti roll bar brackets
The new runabout thats robbing all the boxy`s time at the min
once its passed its nct/mot will get back to the boxy full time
Ran the rest of the brake lines
Fitted the freshly painted shock forks to the ohlins old ones where in bad shape
Also painted the Rear Anti roll bar brackets
The new runabout thats robbing all the boxy`s time at the min
once its passed its nct/mot will get back to the boxy full time
Re: My ec-8 h22a build lots of pic`s
Got my custom made clutch cable smoothed a bit more of the engine bay slow progress but looking good , also finished up my other 3 hoops of my Rays just the 90 studs and the centers and be putting them back together with new 90 degree valves from ebay,
Anyways pics of the progress not as much as i would like with summer coming fast but been a busy few other weeks with my accord and vti but should be center of attention from now till the summer till its on the road
Bay been smoothed
getting there
Bit better but still a bit to go
My ten inch longer clutch cable
Looks as before just longer
The hoops of the ray`s all purple awaiting the studs and centers so can be put back together
Managed to get the Euro r manifold to fit had a bracket in the way when i first tried to fit it which was hitting the sump out with the angle grinder and now fits perfect
Bracket that was hitting the sump now removed
Where bracket was hitting was at the start of the flexi
Box and mani back on ready to drop back in after smooting is done and euro r sir-t sigle belt pulley has been found ,
Next few bits needed will be some tires alt bracket and drive shafts had to put my pit-bull down so that kinda ate the drive shaft money this month so going to finish the body work while i save few quid that again
Anyways pics of the progress not as much as i would like with summer coming fast but been a busy few other weeks with my accord and vti but should be center of attention from now till the summer till its on the road
Bay been smoothed
getting there
Bit better but still a bit to go
My ten inch longer clutch cable
Looks as before just longer
The hoops of the ray`s all purple awaiting the studs and centers so can be put back together
Managed to get the Euro r manifold to fit had a bracket in the way when i first tried to fit it which was hitting the sump out with the angle grinder and now fits perfect
Bracket that was hitting the sump now removed
Where bracket was hitting was at the start of the flexi
Box and mani back on ready to drop back in after smooting is done and euro r sir-t sigle belt pulley has been found ,
Next few bits needed will be some tires alt bracket and drive shafts had to put my pit-bull down so that kinda ate the drive shaft money this month so going to finish the body work while i save few quid that again
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
i just love how you colour everything in
the wheels look wicked i really like them mate great work slowly but surely this will be very interesting when finished
the wheels look wicked i really like them mate great work slowly but surely this will be very interesting when finished
White GL
Unique Edition
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
SuperDOHC wrote:i just love how you colour everything in
the wheels look wicked i really like them mate great work slowly but surely this will be very interesting when finished
Haha we all need some colour in our life , cheers appreciated
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Got a few other small bits done on this
Painted the front filler bar champ white
And after some clear
Preped and primed the other 3 wheel centers
Painted champ white
All cleared and hoops cleared waiting on the studs
Threw a few coats of clear over the front t-bar
Fixed the few blemishes on the roof
Then set about prepping the bonnet for some champ white
After a bit of paint to see how the repair on the front of the bonnet went, Can be seen on first page clearly and how it is now
where dent was
Rear anti roll bar gets a few coats of clear
Then it was on to the wheels studs some pics of that progress
All preped and cleaned
3 coats of primer later
3 more coats of purple and 3 of clear and tad da
Now just to put the wheels back together get a set of 90 degree valves and get tires fitted so will need to collect some wheel spacers 25mm
Also need to get more of this and finish the bay bonnet and bumpers
Painted the front filler bar champ white
And after some clear
Preped and primed the other 3 wheel centers
Painted champ white
All cleared and hoops cleared waiting on the studs
Threw a few coats of clear over the front t-bar
Fixed the few blemishes on the roof
Then set about prepping the bonnet for some champ white
After a bit of paint to see how the repair on the front of the bonnet went, Can be seen on first page clearly and how it is now
where dent was
Rear anti roll bar gets a few coats of clear
Then it was on to the wheels studs some pics of that progress
All preped and cleaned
3 coats of primer later
3 more coats of purple and 3 of clear and tad da
Now just to put the wheels back together get a set of 90 degree valves and get tires fitted so will need to collect some wheel spacers 25mm
Also need to get more of this and finish the bay bonnet and bumpers
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Good progress once again do love the colours
Is the car up and running yet or is the engine still not fitted ?
Is the car up and running yet or is the engine still not fitted ?
White GL
Unique Edition
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Engine will run as is just out for flushing and painting the bay and the gearbox recess and pulley recess to be sorted once painted lume is ran so be plug and play pretty much might have to extend a few wires to tidy it up a bit nothing major, gonna do the rocker cover soon now just to figure iut what to do with it
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Few other small bits got done to this
All 4 wheels back together
Brake M/C striped masked and preped
Red primer
Grey primer
Wiper motor cover got the same treatment
Brake M/C all done
Wiper motor cover and M/C Lid painted
All back together
Wiper motor all back together
Mixed up some paint
Finished the bonnet
Cleaned and started to paint the rear bumper
Started to mask up the rest of the car for the final flatting and coat
Thats all for now bit more soon enough
All 4 wheels back together
Brake M/C striped masked and preped
Red primer
Grey primer
Wiper motor cover got the same treatment
Brake M/C all done
Wiper motor cover and M/C Lid painted
All back together
Wiper motor all back together
Mixed up some paint
Finished the bonnet
Cleaned and started to paint the rear bumper
Started to mask up the rest of the car for the final flatting and coat
Thats all for now bit more soon enough
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Bit more done on this again nothing major just painted the front bumper and front lip smoothed the bay a bit more fitted the steering wheel and pics below of whats been done
Picked this up
Bonnet and bumper done
Bay smoothed a bit more
Picked this up
Bonnet and bumper done
Bay smoothed a bit more
Re: My ec-8 h22a build Very pic heavy lil bits
Always Loved The 4 Door Ek'svtecmossy wrote:
Re: My ec-8 h22a build Very pic heavy lil bits
Cheers bought this last night aswell i know its the enemy being a toybota but bargain had to buy itR3H4N wrote:Always Loved The 4 Door Ek'svtecmossy wrote:
Should be busy enough with the 3 of them
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
what wheels are they buddy ?
White GL
Unique Edition
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Ones on the levin or vti ?