My Si Ef-3 h22a hatch build
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Yeah mad to get running just want it done once and done right so being a bit slower than I'd like and finding parts for 20 yr old civic slows it up aswell one day it will be a flippin quick box till then keep chipping away haha ,
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Been cracking away with a few bits on this nothing much just finishing off the wheels 2 had some bad kerbing so took a fair bit of prep to get them to paint but some pics of the progress and the end result also painted the rear anti-roll bar and be painting the brackets the same colour as the front upper strut feet ford signal green , also painted the rear filler bar and hatch, Anyhows pics of bits done
One of the very badly kerbed ones after some prep
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00979.jpg)
Studs Preped ready to be painted
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00976.jpg)
Painting the little studs
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00982.jpg)
Clear coat on the hoop
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00981.jpg)
Another clear coat shot
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00980.jpg)
And a shoot of a finished result opinions welcome but love them so dont care haha
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00991.jpg)
Front upper strut clearcoat`d
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00992.jpg)
A shot of one on the car and the rear hatch an filler bar painted
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00990.jpg)
Rear hatch and filler bar
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00989.jpg)
Pic of the front upper strut feet after painting
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00988.jpg)
Just mmmmmmmmm needs a buff but still loving them
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00987.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00986.jpg)
Just a random shot
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00993.jpg)
Stripping and prepping rear arb + brackets
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00984.jpg)
Basecoat on finished it tday but forgot ta take pics
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00985.jpg)
Think dats it for now more soon :thumbup:
also figured out the turbo set up going t28 bb 500cc injectors s15/ r 33/34 intercooler cast log mani no space for ramhorn
custom down pipe and full 3 inch system with custom cat for test time 300bhp or so :)after a neptune remap and some shinney bits
One of the very badly kerbed ones after some prep
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00979.jpg)
Studs Preped ready to be painted
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00976.jpg)
Painting the little studs
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00982.jpg)
Clear coat on the hoop
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00981.jpg)
Another clear coat shot
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00980.jpg)
And a shoot of a finished result opinions welcome but love them so dont care haha
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00991.jpg)
Front upper strut clearcoat`d
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00992.jpg)
A shot of one on the car and the rear hatch an filler bar painted
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00990.jpg)
Rear hatch and filler bar
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00989.jpg)
Pic of the front upper strut feet after painting
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00988.jpg)
Just mmmmmmmmm needs a buff but still loving them
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00987.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00986.jpg)
Just a random shot
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00993.jpg)
Stripping and prepping rear arb + brackets
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00984.jpg)
Basecoat on finished it tday but forgot ta take pics
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00985.jpg)
Think dats it for now more soon :thumbup:
also figured out the turbo set up going t28 bb 500cc injectors s15/ r 33/34 intercooler cast log mani no space for ramhorn
![Sad :(](./images/smilies/icon_sad.gif)
-
- Lvl3 Street Racer
- Posts: 379
- Joined: Sun Nov 25, 2007 5:29 pm
- Location: Limerick, Ireland
- Contact:
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Looking well man.. Is there any way of making up a set of centre caps for the wheels would really finish them off
![Image](http://i10.photobucket.com/albums/a114/C-Rex/SedanSig.png)
http://www.efcivicsedan.com" onclick="window.open(this.href);return false;
http://www.cr-x.org" onclick="window.open(this.href);return false;
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
No so rare they cant be got been looking so a set of extended blox lug nuts in purple should finish them off nicely also having to run extended hub studs so dont reckon center caps would work on the front with the massive breaks tbh paul.
-
- Lvl3 Street Racer
- Posts: 379
- Joined: Sun Nov 25, 2007 5:29 pm
- Location: Limerick, Ireland
- Contact:
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
I ment to make up something yourself though like cut the centre out of a hubcap that might have a similar curve and try an make a way of clipping it in...
Crazy wheel though, can definately say one of the only set in Ireland/Uk/Europe
Crazy wheel though, can definately say one of the only set in Ireland/Uk/Europe
![Image](http://i10.photobucket.com/albums/a114/C-Rex/SedanSig.png)
http://www.efcivicsedan.com" onclick="window.open(this.href);return false;
http://www.cr-x.org" onclick="window.open(this.href);return false;
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Yeah one r two other sets on the net I've found but there in the states so not many over here by the looks of it , have taught about it Paul but reckon there wont be any room with extended hub studs n extended lugs reckon they'll poke out beyond the dish tbh
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
rims r sick bro thats whats moding is about being different FTW i think there sickkkkkkk
The build viewtopic.php?f=19&t=29771" onclick="window.open(this.href);return false;
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
hey buddy nice colours - have you managed to fit the gearbox in yet or having problems with the length of it?
PS - a light tint on the windows would look great
PS - a light tint on the windows would look great
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Box and motor were fitted was some issuses but its all good now so once its flushed and tucked a bit should all go back together with a lot less hassel did have to recess the Chassis leg on both sides for the pulley and box .
Not a fan of tints tbh could of picked up some tinted rears a while ago but not my thing sure even wiped the ones off my coupe hate them tbh.
Not a fan of tints tbh could of picked up some tinted rears a while ago but not my thing sure even wiped the ones off my coupe hate them tbh.
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Few other small bits done to this and getting a few goodies for it soon enough
Got a heap of this stuff aka brake line and my flaring tool bunch of new fixings and started to run some brake line to the prop valve some pics of that
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01003.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01002.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01015.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01014.jpg)
Next step will be running it to each corner
Also painted rear hatch needed another coat r two and un masked that and like a big kid at xmas, Then started to wonder will black garnish work looks good to me but found a red one reminds me better ring him anywho pcs of that
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01000.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00999.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01013.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01017.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01016.jpg)
Collecting some bits to give few more ponies and so can get it running again once motor is back in place.
thats all for now
continued
So got a euro r exhaust mani of Karlek9 nice one :thumbup: so can get it running soon enough also picked up a euro r flywheel and throttle body aswell will need extra air so makes sense and it loks so much bigger so
Some pics of the bits and some of a lil more progress
Throttle body comparision prelude right euro r left
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00984-1.jpg)
One of it fitted to inlet manifold
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00990-1.jpg)
Pic of the exhaust needs a tidy up but will just be on till turbo set up is all there for it
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00992-1.jpg)
Painted front hubs and arms
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00993-1.jpg)
Gearbox back off to fit the flywheel
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00991-1.jpg)
old flywheel
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00986-1.jpg)
Euro-r fly fitted an andy in the way :facepalm:
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00985-1.jpg)
Then bothered to run another brake line r two but bat died so only 2 pics of that get more later
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00987-1.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00989-1.jpg)
Load more been done and to do so update soon again but thats it for now L8r`s![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
Got a heap of this stuff aka brake line and my flaring tool bunch of new fixings and started to run some brake line to the prop valve some pics of that
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01003.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01002.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01015.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01014.jpg)
Next step will be running it to each corner
Also painted rear hatch needed another coat r two and un masked that and like a big kid at xmas, Then started to wonder will black garnish work looks good to me but found a red one reminds me better ring him anywho pcs of that
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01000.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00999.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01013.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01017.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC01016.jpg)
Collecting some bits to give few more ponies and so can get it running again once motor is back in place.
thats all for now
continued
So got a euro r exhaust mani of Karlek9 nice one :thumbup: so can get it running soon enough also picked up a euro r flywheel and throttle body aswell will need extra air so makes sense and it loks so much bigger so
![Smile :)](./images/smilies/icon_smile.gif)
Some pics of the bits and some of a lil more progress
Throttle body comparision prelude right euro r left
![Smile :)](./images/smilies/icon_smile.gif)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00984-1.jpg)
One of it fitted to inlet manifold
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00990-1.jpg)
Pic of the exhaust needs a tidy up but will just be on till turbo set up is all there for it
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00992-1.jpg)
Painted front hubs and arms
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00993-1.jpg)
Gearbox back off to fit the flywheel
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00991-1.jpg)
old flywheel
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00986-1.jpg)
Euro-r fly fitted an andy in the way :facepalm:
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00985-1.jpg)
Then bothered to run another brake line r two but bat died so only 2 pics of that get more later
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00987-1.jpg)
![Image](http://i556.photobucket.com/albums/ss10/vtecmossy/DSC00989-1.jpg)
Load more been done and to do so update soon again but thats it for now L8r`s
![Smile :)](./images/smilies/icon_smile.gif)
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
I look forward to the end:)
ARC for sale ?
ARC for sale ?
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
U and me both Arc sold man sorry ,
- Allkiller
- Lvl4 Nos Enhanced Poster
- Posts: 863
- Joined: Sun Mar 15, 2009 8:59 pm
- Location: Rotating the Earth
Re: My ec-8 h22a build Very pic heavy Motor + box out pg 9
Just read through this build up, amazing stuff and a credit to you mate....really looking forward to seeing this up and running, as you probably are too
You are basically building exactly the car i would love to have
Keep pics coming![Cool 8)](./images/smilies/icon_cool.gif)
![Thumbs Up :top:](./images/smilies/icon_thumright.gif)
![Thumbs Up :top:](./images/smilies/icon_thumright.gif)
You are basically building exactly the car i would love to have
Keep pics coming
![Cool 8)](./images/smilies/icon_cool.gif)