I have a OBD2b ecu from an EK9,
ive bought the obd0 to obd2b harness and connected it to my ef9 with all the other nessesary components to convert it to obd2,
and it wont start due to the immobiliser in the ecu, so does anyone know how to remove the immobiliser from the ecu,
i also have the logbooks to the original car where the engine and ecu came from, can i get honda to do it??
thanks
remove IMMOBILISER from ecu
-
- Lvl2 Potential Hazard
- Posts: 117
- Joined: Thu Nov 29, 2007 4:10 pm
Thre was a swiss site but TBH I think it dealt with the UK ECU's.
You can get the imbol stuff from anotehr car and perhaps you can get it recoded at Honda but they aint gonna remove it for you.
Best bet is to try pgmfi.org but it's highly unlikely anyone will tell you what to do, they may do it for you tho.
You can get the imbol stuff from anotehr car and perhaps you can get it recoded at Honda but they aint gonna remove it for you.
Best bet is to try pgmfi.org but it's highly unlikely anyone will tell you what to do, they may do it for you tho.
- sordfish
- Lvl2 Potential Hazard
- Posts: 153
- Joined: Fri Nov 02, 2007 8:19 pm
- Location: Blackpool
- Contact:
http://www.doctronic.at/Products.htm
sell bypass modules. Email then to see if it works on your ecu.
Keeping it secret is really pointless as anyone that really wanted to steal the car could do it with a p28, a harness and about 10 mins with a wiring diagram.
sell bypass modules. Email then to see if it works on your ecu.
Keeping it secret is really pointless as anyone that really wanted to steal the car could do it with a p28, a harness and about 10 mins with a wiring diagram.
civic-less