Rear Garnish Honda Access rare part replication.
- Japtech_imports
- **Trader**
- Posts: 205
- Joined: Sun Aug 19, 2007 4:40 pm
- Location: Southampton
- Contact:
Rear Garnish Honda Access rare part replication.
Hi Guy's ,
I have recently seen a couple of these on Ebay all with damage to the garnish one went for £256 from New Zealand.
There is also one from Japan currently running at the moment close to £500
Item number 251256467065
For that reason I started designing my own.
I have been working on a little project to replicate the original part.
Currently I am getting the vinyl graphics made up to help me with the task in my design.
I have built a proto type and it works very well.
I intend to tweak this a little bit where it will be aqua with the side lights and this will go off and to red when under braking.
Give or take I can make this different colours with in reason.
This is all IP65 protected against the weather.
The garnish looks very similar to the factory part.
The garnish sits exactly the same as stock on the tail gate.
I would make a production run of these as I have a couple of spare trims to play with.
I can only do this on the red reflectors, When I work out a cost for the conversion I would like to offer this to anyone who maybe interested ?
If I don't have one n stock, for a fee if you send me yours I will convert it, Then send it back to you.
Typically it takes me about a day to make this.
This is all hand made I'm getting the stickers made so they are clean and crisp.
Original factory part
Here are some pictures of my design.
Just testing the water as to who would be interested in one of these and also a realistic cost that people would be prepared to pay for this.?
Any comments would also be appreciated.
Thank you
Mike
I have recently seen a couple of these on Ebay all with damage to the garnish one went for £256 from New Zealand.
There is also one from Japan currently running at the moment close to £500
Item number 251256467065
For that reason I started designing my own.
I have been working on a little project to replicate the original part.
Currently I am getting the vinyl graphics made up to help me with the task in my design.
I have built a proto type and it works very well.
I intend to tweak this a little bit where it will be aqua with the side lights and this will go off and to red when under braking.
Give or take I can make this different colours with in reason.
This is all IP65 protected against the weather.
The garnish looks very similar to the factory part.
The garnish sits exactly the same as stock on the tail gate.
I would make a production run of these as I have a couple of spare trims to play with.
I can only do this on the red reflectors, When I work out a cost for the conversion I would like to offer this to anyone who maybe interested ?
If I don't have one n stock, for a fee if you send me yours I will convert it, Then send it back to you.
Typically it takes me about a day to make this.
This is all hand made I'm getting the stickers made so they are clean and crisp.
Original factory part
Here are some pictures of my design.
Just testing the water as to who would be interested in one of these and also a realistic cost that people would be prepared to pay for this.?
Any comments would also be appreciated.
Thank you
Mike
Honda The Power Of Dreams.
If you need a part what ever it maybe.
I might just have it
If you need a part what ever it maybe.
I might just have it
- sabvtivtec
- Lvl4 Nos Enhanced Poster
- Posts: 894
- Joined: Mon Nov 06, 2006 5:55 pm
Re: Rear Garnish Honda Access rare part replication.
That's Is rather impressive that you replicated it. It looks exactly the same. I'd be interested in one asking as the price is good
- Japtech_imports
- **Trader**
- Posts: 205
- Joined: Sun Aug 19, 2007 4:40 pm
- Location: Southampton
- Contact:
Re: Rear Garnish Honda Access rare part replication.
Thank you, it took me a while to brake down the original via online pictures as to how I could make this.
I'm fairly confident I could make this for a CRX garnish also.
Have you any idea on a price.?
Granted this is a replica and not an original, but subsequently a very rare part.
I'm fairly confident I could make this for a CRX garnish also.
Have you any idea on a price.?
Granted this is a replica and not an original, but subsequently a very rare part.
Honda The Power Of Dreams.
If you need a part what ever it maybe.
I might just have it
If you need a part what ever it maybe.
I might just have it
Re: Rear Garnish Honda Access rare part replication.
Woww that is so cool i would like one if the price is good
-
- Learner - Newbie
- Posts: 6
- Joined: Fri Sep 06, 2013 6:51 pm
Re: Rear Garnish Honda Access rare part replication.
I would be interested.
Re: Rear Garnish Honda Access rare part replication.
This is awesome.
Never ever seen anyone do this.
Never ever seen anyone do this.
2000 CRV Camel Trophy Edition
2009 Kia Pro Ceed 3 1.6 crdi
2009 Kia Pro Ceed 3 1.6 crdi
Re: Rear Garnish Honda Access rare part replication.
Would definitely be interested!
Re: Rear Garnish Honda Access rare part replication.
Want one of these pm price to convert my plain red garnish to that cheers
-
- Lvl3 Street Racer
- Posts: 428
- Joined: Fri Nov 05, 2010 6:58 pm
- Location: Rep. Of Ireland
Re: Rear Garnish Honda Access rare part replication.
Lets just say everyone would be interested lol
Re: Rear Garnish Honda Access rare part replication.
Does it glow indigo like the oem one??
Re: Rear Garnish Honda Access rare part replication.
Not for me to be honest. Think the lights at the back look good as they are. On a very clean looking Red 4G may just pull it off but anything other than that is a no no. I'm quite tempted to say it's a bit takki but that's just MY opinion of MY taste! Alot of bloody money to for an illuminated sign
- Japtech_imports
- **Trader**
- Posts: 205
- Joined: Sun Aug 19, 2007 4:40 pm
- Location: Southampton
- Contact:
Re: Rear Garnish Honda Access rare part replication.
I agree but the original part is super rare, Hence the high price for an original.
I don't intend to charge big £ for my replicas.
I am however contemplating making these in real carbon, mould an original and sell these as stock or with the emblem illuminated in carbon.
I wonder if anyone would also be interested in this, to make it worth my while as this will be made from scratch and will be completely obsolete. please let me know your thoughts.
The problem I have is I only have a few in stock to do this and these have a couple of broken clips on the back. Granted people who want theirs converted it isn't really a problem but to sell these off the shelf trying to find ones to buy could be a nightmare as I have seen these on ebay for like £60 for a standard part.
which in turn push's the price up.
I have the JDM one on my Civic
UK garnish reflector is a brighter red than a JDM garnish. So I am getting both colours made up.
I have just come back from abroad and will be picking up all of the decals mid next week, So I can start production.
To be honest I want to make sure they are perfect before I take orders.
Converted prices £150 for forum members this includes the UK postage price back to you.
Colours of the garnish light:-
Red
Blue
Green
Yellow
Purple
White
Amber
I'm working on trying to find the original colour. If anyone has some suggestions please feel free.
The only way I can think of is transparent film over a clear led or a coloured dye over a clear led.
If there is a colour that your particularly after, please feel free to contact me.
Mike
I don't intend to charge big £ for my replicas.
I am however contemplating making these in real carbon, mould an original and sell these as stock or with the emblem illuminated in carbon.
I wonder if anyone would also be interested in this, to make it worth my while as this will be made from scratch and will be completely obsolete. please let me know your thoughts.
The problem I have is I only have a few in stock to do this and these have a couple of broken clips on the back. Granted people who want theirs converted it isn't really a problem but to sell these off the shelf trying to find ones to buy could be a nightmare as I have seen these on ebay for like £60 for a standard part.
which in turn push's the price up.
I have the JDM one on my Civic
UK garnish reflector is a brighter red than a JDM garnish. So I am getting both colours made up.
I have just come back from abroad and will be picking up all of the decals mid next week, So I can start production.
To be honest I want to make sure they are perfect before I take orders.
Converted prices £150 for forum members this includes the UK postage price back to you.
Colours of the garnish light:-
Red
Blue
Green
Yellow
Purple
White
Amber
I'm working on trying to find the original colour. If anyone has some suggestions please feel free.
The only way I can think of is transparent film over a clear led or a coloured dye over a clear led.
If there is a colour that your particularly after, please feel free to contact me.
Mike
Honda The Power Of Dreams.
If you need a part what ever it maybe.
I might just have it
If you need a part what ever it maybe.
I might just have it
Re: Rear Garnish Honda Access rare part replication.
Lights up blue and red when you brake?, Be interested in getting mine converted once you have it perfected