ee9 wheel bearings

[4grob]

hi guys, was hoping sum1 could shed some light on the wheel bearings on a ee9. Bascicaly have upgrade the brakes on my sedan for ee9 ones i used the hole hubs and belive the wheel bearings r shot. Wen i went to the auto part store they were typicaly confused because i dint have the reg plate. Wen we looked manualy they couldnt find the exact ones was comin up with eg models asweel. Does any1 know were i can get a set from or r they the same as other models as found 16i easy enough just dont want to have to keep goin back a forth to i finaly get it sorted any light would be much apprecited

Cheers

[callum0892]

Simauto sell them, and yes i think they are the same.

[4grob]

Sweet, ill check there web out. So funny that autopart stores s**t themselves wen ya ask the to do sumthin remotely challenging lol. Ummm computer says no!!! Lol cheers bud

[Gizmo]

Simauto sell Genuine Koyo bearings @ £35 each inc Delivery

[4grob]

Havnt had the chance to look on there web yet but serms a gd price. Will have to get on with it

[lordame]

Simauto sell Genuine Koyo bearings @ £35 each inc Delivery

Really a good price !!

The best price i got here in France is 65 € via SNR = Koyo

[DrCunz]

and they're not the same there are 2 different types of wheel bearing iD is slightly smaller on one but I know sim auto have them both. Some VT and eg bearings have the same ID 42mm (ithink) My wheel flanges didn't fit as their diameter was too small. also just seen how old this post is......

[Dave]

Confirm that they are different.
They are however the same as an early prelude. So sometimes you'll get lucky with new old stock.
Further details on CRX-UK


Tehre is a lot of cross referncing to do and you'll find a cheaper part.
I'm doing this with the shuttle at the minute. The NTN bearing which I have a part number for seems to be untraceable. But it's got the same diamensions as those used on other vehicles with different part numbers.

Measure and search is the best way forward. inner dia, outer dia and height.

[nominous]

I bought:

HONDA PRELUDE 2.0 EX 16v FRONT WHEEL BEARING

From ebay.

[nominous]

Did a spot of researching, so using this thread as a dumping ground for it:

Code: Select all

VT
PFKL600202	     44300-SF1-008


16V
PFKL600178	     44300-SB2-962
PFKL600230	     44300-SX8-004
PFKL600182	     44300-SB2-966

Lude              44300-SF1-004
2000i EX,2000 EX (16V)	88-91	


USDM:
INTEGRA	1600 DISC BRAKES W/ABS		   1993.05		44300-SR3-A02	Probs 16V CRX
INTEGRA	1600 DISC BRAKES W/O ABS	    1993.05		44300-SR3-008	Ditto
INTEGRA	1600 DOHC DISC BRAKES W/ABS    1989-93		44300-SF1-004
INTEGRA	1600 DOHC DISC BRAKES W/O ABS  1989-93		44300-SF1-004
INTEGRA	1600 DOHC DRUM BRAKES		    1989-93		44300-SF1-008

Info:
44300-SF1-004 = 44300-SF1-008

For SiR, Teg GSR / XSi:
http://www.autodynamics-honda.com/hosf1frhubwh.html" onclick="window.open(this.href);return false;

Listed for Prelude:
http://www.hondapartsnow.com/genuine/ho ... 1-008.html" onclick="window.open(this.href);return false;

NSK catalogue (very useful):
http://www.autoraid.ru/uploaded/Cataloges/NSK.xls" onclick="window.open(this.href);return false;

Forum thread on bearing sizes (not at all complete):
http://www.k20a.org/forum/showthread.php?t=37607" onclick="window.open(this.href);return false;


^^^^ copying that thread and filling in the blanks would be very useful for those doing RWD conversions or wanting to get very large shafts fitted for big power.

[DrCunz]

I've got a very mysterious set of hubs that come with VT calipers and 262 but the the wheel flanges are too small for the bearings that fit the hubs. And the other bearings that fit the wheel flanges are too small for the hubs. So I am currently at a loss to what I have. Unfortunately the mechanic didn't keep the old bearings.
I have been using this site

http://seekpart24.com/search?q=wheel+bearing&at=3902" onclick="window.open(this.href);return false;

as it is one of the few that give ID and OD. If anyone has any suggestion at all please feel free to let me know.

[nominous]

Measure the ID of the bearing recess in the hub and the OD of the flanges/spindles that would fit into the bearings.

I have stripped VT hubs here with correct parts on both sides.