Marks Civic 1.4 GL Track car 04/03/2013

[Sonic-jdm]

Here's my project, my plans are to turn it into a manual with a B16a2.
I believe this is going to be a nightmare to do as it a Auto, but I do like a challenge.

The car when I picked her up




Thought il post up a few pictures of my EG race car that I'm racing this year with the Civic cup 2013







Right so the work starts!


Fuel tank removed




Bit of weight saving cut and removed brackets no longer needed


Anyone wants to know how heavy a ef door is..........26kg! that's with out door card and speaker!
Going to try and get these down between 12-14kg each.


Going to need abit of guidance doing this B series transplant......

Question time!
Q1. Do I need a fuel tant from a CRX plus fuel lines? Can you not modify the original fuel lines to fit?
If you have any of the parts that you think I will need to pull this project off then drop me a PM
Thanks
Mark

[griffo20022]

Wow thats a mega clean shell to start with bud! Looking forward to seeing this!

[Fudgey7]

Hi Mark
Great work so far, looking forward to your build. We are doing a D16 All motor build for santa pod, we are going for the uk record N/A.
cheers
Fudgey

[Sonic-jdm]

Hi Mark
Great work so far, looking forward to your build. We are doing a D16 All motor build for santa pod, we are going for the uk record N/A.
cheers
Fudgey

Cool will keep an eye out with your build.
Are you looking to run 13's? I have a brand new set that are light weight ideal for what your trying to achieve.

[sabvtivtec]

Nice Ef. This Ef will turn out rather nice when your done with it

[Fudgey7]

Hi Mark
Great work so far, looking forward to your build. We are doing a D16 All motor build for santa pod, we are going for the uk record N/A.
cheers
Fudgey

Cool will keep an eye out with your build.
Are you looking to run 13's? I have a brand new set that are light weight ideal for what your trying to achieve.

What do you have? we are looking at V2 Competition wheels 13x8 to run 22x8x13 Mickey Thompson tyres, or a set of Weld Wheels.
Fudgey

[Sonic-jdm]

Hi Mark
Great work so far, looking forward to your build. We are doing a D16 All motor build for santa pod, we are going for the uk record N/A.
cheers
Fudgey

Cool will keep an eye out with your build.
Are you looking to run 13's? I have a brand new set that are light weight ideal for what your trying to achieve.

What do you have? we are looking at V2 Competition wheels 13x8 to run 22x8x13 Mickey Thompson tyres, or a set of Weld Wheels.
Fudgey

I have a set Of Team dynamics 1.2 pro cost me £465 and had to wait 14 weeks! to have these made for Honda fitment/off set.
I was going to run these in the civic-cup but they changed the rules for 2013 to 15" wheels only! So my plan went out the window!
Brand new never used still in boxes 4x100 et35 13x7j light weight!
These fit over 262 vti brakes etc etc but not 282.
£300 collected no less.
More info here:
http://www.ebay.co.uk/itm/13-WESTFIELD- ... 4609927747" onclick="window.open(this.href);return false;

[Lee4391]

Looks like a clean.chassis

What lift are you using dude looks awesome? I find working under axle stands on my drive is tedious.

[Tahir]

Very nice, eg looks rather cool as well!

[Sonic-jdm]

Cheers for the comments

Finally tackled the worst job ever and that's removing sound deadening and cleaned

[walsh123]

Nice progress so far dude

Bit of a random Q, but, what is the colour of the floor in the Eg ? I take it you re-painted it ?

As for the swap a fuel tank would make things much easier just a Vt tank. Crx lines wont fit IIRC they are too short due to Crx shorter Wheel base.

Converting them from auto to manual is an absolute doddle, worst bit drill two holes otherwise its un bolt and bolt on.

[Sonic-jdm]

Nice progress so far dude

Bit of a random Q, but, what is the colour of the floor in the Eg ? I take it you re-painted it ?

As for the swap a fuel tank would make things much easier just a Vt tank. Crx lines wont fit IIRC they are too short due to Crx shorter Wheel base.

Converting them from auto to manual is an absolute doddle, worst bit drill two holes otherwise its un bolt and bolt on.

Yeah I'm just trying to find a VT tank at the mo but no luck so far.

Regards to the paint yes it was resprayed. We made the paint colour up there and then with what we had left over, mixing Matt black with abit of blue and white....so sorry there is no paint code I'm afraid

[dazec8]

i used a 1616 tank used the original fuel in hard pipe and used flexy fuel pipe
for the return line
have a look at my thread iv just got my b18c4 started last week

viewtopic.php?f=19&t=29771" onclick="window.open(this.href);return false;

pm me if u get stuck ill try to help u the best i can but im still coming up with probs with mine

[Site]

you can use a 16-16i tank like mentioned above...

I think you can use the original feed line but you will need to use a new return...i just used braided lines through the whole car...

Looks like this will be a sick project!

[SuperDOHC]

like those wheels alot mate