Project: Wagon Attack (4WD Shuttle Time Attack Build!)
- MrJacobsSedan1992
- Lvl2 Potential Hazard
- Posts: 230
- Joined: Sun Apr 29, 2012 8:44 am
Re: Gizmo's RT-4WD Shuttle - Because Race Car
That gauge is sweet! Looks wicked in the night
ED2 sedan-91
- callum0892
- Lvl4 Nos Enhanced Poster
- Posts: 744
- Joined: Sun Dec 11, 2011 2:34 pm
- Location: Surrey/Bristol
Re: Gizmo's RT-4WD Shuttle - Because Race Car
Why does the gauge read zero at night?
Re: Gizmo's RT-4WD Shuttle - Because Race Car
I fitted the gauge on Tuesday, but ran out of time to fit the sandwich plate, But, if the guage doesnt see the senser, it constantly flashes, which is annoying
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: Gizmo's RT-4WD Shuttle - Because Race Car
That sender is massive for the oil pressure!
2010 Audi A3 1.6TDi Sport
Re: Gizmo's RT-4WD Shuttle - Because Race Car
Yeah, for some reason they are. Mine's the same size (autogauge too).
I was wondering about running it off a T from the turbo feed pipe when fitting that. I've seen that done on Eddies car.
Oil was still on offer at the local one.
Giz, take a drive and buy a few cans.
Certainly worth it !
What's the part number on the brake pads ?
Any idea on the drums ?
I was wondering about running it off a T from the turbo feed pipe when fitting that. I've seen that done on Eddies car.
Oil was still on offer at the local one.
Giz, take a drive and buy a few cans.
Certainly worth it !
What's the part number on the brake pads ?
Any idea on the drums ?
Re: Gizmo's RT-4WD Shuttle - Because Race Car
Shoes where eBay mintex jobbies. Like £11 delivered.
If I get this new job. I'll be running the shuttle on some millers 10w60. As it won't be used for work anymore
If I get this new job. I'll be running the shuttle on some millers 10w60. As it won't be used for work anymore
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: Gizmo's RT-4WD Shuttle - Because Race Car
What's the crack with 10-60, much thinner?
Mate runs it in his 400hp+ EG turbo too, recommended by Ricky.
Good for N/A cars too?
Mate runs it in his 400hp+ EG turbo too, recommended by Ricky.
Good for N/A cars too?
2010 Audi A3 1.6TDi Sport
Re: Gizmo's RT-4WD Shuttle - Because Race Car
Was recommended by pete as it cured all his oil temp issues. It's thicker so doesnt break down as quick as it handles heat better
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: Gizmo's RT-4WD Shuttle - Because Race Car
Ahh he did mention something similar when he was last down my way...
2010 Audi A3 1.6TDi Sport
Re: Gizmo's RT-4WD Shuttle - Because Race Car
It's good for track use. But you may suffer some Mpg loss on a daily engine
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: Gizmo's RT-4WD Shuttle - Because Race Car
Sneaky Peek....
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: Gizmo's RT-4WD Shuttle - Because Race Car
Nice one M@rk, got me a couple.m@rk wrote:23.99 for gtx
it is, or was on offer at asda.... 12 quid
2000 CRV Camel Trophy Edition
2009 Kia Pro Ceed 3 1.6 crdi
2009 Kia Pro Ceed 3 1.6 crdi
Re: Gizmo's RT-4WD Shuttle - Because Race Car
dida4g wrote:Nice one M@rk, got me a couple.m@rk wrote:23.99 for gtx
it is, or was on offer at asda.... 12 quid
and gizmo is moaning asda is 40 mins away,
go and get 4, you have a years oil supply then
16i TURBO FOR SALE
pm me if intersted
.
pm me if intersted
.
Re: Gizmo's RT-4WD Shuttle - Because Race Car
Hudds ASDA only had 15/40 left though.
2000 CRV Camel Trophy Edition
2009 Kia Pro Ceed 3 1.6 crdi
2009 Kia Pro Ceed 3 1.6 crdi
Re: Gizmo's RT-4WD Shuttle - Because Race Car
Been trying to solve my Water leaking issues. Every time it rains, i end up with a puddle in the passenger footwell, which has caused some "Damage" to the actual floor. It seems to have been a previous issue, as there is a repair to the underside of the actual chassis rail underneath the car, and signs of a previous repair on the inside of the floor.
I first thought this was the issue, this grommet with the cowl screws into, as the seal had gone dry, and there was some evidence of instant gasket holding it in. So removed, cleaned and used some Seam sealer to glue it back in place. The heater motor is directly under this grommet
This didnt solve my problem. So, i removed the heater box out and had a closer look. Yep, Someone has certainly been here before...
There was a hole here, where the rust is, So treated it and seam sealed it. Unfortunatly, the leak wasnt here...
Turned out to be this hole....I'm assuming someone has got stuck, maybe leafs or something on the inner workings of the A-Pillar. So i covered the hole from the inside, and seam sealed it. The water has been coming through a hole (Mid-right under my screw driver) - Again, so i seam sealed it shut
It currently doesn't leak....But i may re-seal it after a week or so just to be safe. Once thats done. Ill repair the floor inside!
And i repainted my wipers since they were off.
Not bad for 24year old paint....Looks lush when i can actually be arsed to polish it...
I first thought this was the issue, this grommet with the cowl screws into, as the seal had gone dry, and there was some evidence of instant gasket holding it in. So removed, cleaned and used some Seam sealer to glue it back in place. The heater motor is directly under this grommet
This didnt solve my problem. So, i removed the heater box out and had a closer look. Yep, Someone has certainly been here before...
There was a hole here, where the rust is, So treated it and seam sealed it. Unfortunatly, the leak wasnt here...
Turned out to be this hole....I'm assuming someone has got stuck, maybe leafs or something on the inner workings of the A-Pillar. So i covered the hole from the inside, and seam sealed it. The water has been coming through a hole (Mid-right under my screw driver) - Again, so i seam sealed it shut
It currently doesn't leak....But i may re-seal it after a week or so just to be safe. Once thats done. Ill repair the floor inside!
And i repainted my wipers since they were off.
Not bad for 24year old paint....Looks lush when i can actually be arsed to polish it...
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.