Bonnet bra's
Bonnet bra's
Has anyone on here started making these yet, for a VT?
I know Stew@PPW does them for 16v's (£50). And I also have seen the one's on ebay for VT's, but they are £80 which is a bit OTT.
I know Stew@PPW does them for 16v's (£50). And I also have seen the one's on ebay for VT's, but they are £80 which is a bit OTT.
- johnboymartin666
- Lvl5! Turbo Charged Posting
- Posts: 1254
- Joined: Mon Sep 15, 2008 7:55 pm
- Location: Blairhall,Fife.
- Contact:
Re: Bonnet bra's
this place any good?
http://www.car-stuff.com/mmparts/honda-crx/car_bra.html" onclick="window.open(this.href);return false;
http://www.car-stuff.com/mmparts/honda-crx/car_bra.html" onclick="window.open(this.href);return false;
1990 Honda Civic SiR - G337YRJ
Re: Bonnet bra's
Considering its a US site, i doubt they will fit VT's.
Re: Bonnet bra's
Dont get one Marc, you will regret it
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
-
- Lvl4 Nos Enhanced Poster
- Posts: 619
- Joined: Sun Oct 17, 2010 3:41 pm
- Location: Dunstable
Re: Bonnet bra's
Cause more harm than good tbh
-
- Lvl3 Street Racer
- Posts: 428
- Joined: Fri Nov 05, 2010 6:58 pm
- Location: Rep. Of Ireland
Re: Bonnet bra's
They look good on a udsm styled ek but not a 4g IMO
Re: Bonnet bra's
Gizmo wrote:Dont get one Marc, you will regret it
jakescool1234 wrote:Cause more harm than good tbh
Why?
I want one to stop my bonnet getting chipped/dinged which is does quite easily. I bought a MINT bonnet not long ago, after a few months it had dings and was chipped to hell.
Re: Bonnet bra's
I should of showed you at jae
My bra has rubbed through the paint in places down to primer. And has Hadley scuffed areas aswell. I know my bonnet needs TLC anyways. Hense I'm not bothered.
Had a furry lining aswell and still rubbed though
My bra has rubbed through the paint in places down to primer. And has Hadley scuffed areas aswell. I know my bonnet needs TLC anyways. Hense I'm not bothered.
Had a furry lining aswell and still rubbed though
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: Bonnet bra's
Gizmo wrote:I should of showed you at jae
My bra has rubbed through the paint in places down to primer. And has Hadley scuffed areas aswell. I know my bonnet needs TLC anyways. Hense I'm not bothered.
Had a furry lining aswell and still rubbed though
I actually did notice that, but you have an EK one don't you? And doesn't your bonnet have no lacquer on it also?
Re: Bonnet bra's
It was an EF fitment one
The top half of the bonnet had no lauqer. But the bit the bra covered did. As the aids hadn't spread that far yet
The top half of the bonnet had no lauqer. But the bit the bra covered did. As the aids hadn't spread that far yet
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: Bonnet bra's
Could it be that you didnt fit it properly? I'm pretty sure you told me it was an EK one mate.
And what's aid's got to do with anything?
And what's aid's got to do with anything?
- EF_Russ
- Lvl4 Nos Enhanced Poster
- Posts: 702
- Joined: Sun May 04, 2008 10:24 am
- Location: Hertfordshire
Re: Bonnet bra's
Why not just get your bonnet and bumper wrapped in some quality clear vinyl? Cheaper, does the same job, and if done properly you'd never know it's on there.
'91 ED7 (Black)
Re: Bonnet bra's
I don't think that would stop dents though would it?
Re: Bonnet bra's
I got it cheap. Because stoo ordered an EK one but it was an EF one in the bag.....
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.