Zenki's Civic ED7 Full Track Day
Zenki's Civic ED7 Full Track Day
My project :
Honda Civic ED7 1989,
I've a car since 2005, at first it was a daily drive but she quickly changed for the track day
I use it from time to time to go to work in good weather
Modification's list :
Motor :
Exhaust Megan Racing
Catback ZerofighteR
Aluminium Radiator Tegiwa
Swirlt pot Sard
Silicon Hoses Mishimoto
silicon Hoses Samco
Oil Radiator Mocal
Relocation Kit Mocal
Oil Catch Tank Cusco
Kevlar Power CHamber Tegiwa
Adm gasket Hondata
Drivetrain :
Clutch Kit Exedy Stage II
Flywheel Fidanza
FD 4.437
Quaife LSD
Extented short shift Home made
Chassis :
Coil Over Zenky Racing
Ressort Tein 18kg/16kg
Anti sway barSuspension Technique front/rear
C pillar No Name
Silent Bloc Energy Red
Camber kit rear D2
Toe Kit D2
Camber kit front Ingalls
Roll Center Adjuster J's Racing
Steerint Rack 2.83 Quaife
Traction Bar Innovative
Brake :
Kit Wilwood Dynalite front 280mm
Brake lines Wilwood front
Brake lines Goodridge rear
Servo brake and master cylinder EG6
DRear Disc OEM 260mm
Brake cylinder stopper Tegiwa
Interior :
Empty(lol)
Steering Wheel Oreca tulipage 90mm
Gear knob Razo
Gauge Greddy Oil Gearbox Temp
Gauge Stack Oil Pressure
Gauge Stack Pro Oil Temp
Gauge Stack Pro Control Water Temp
Alfano Fun Auto V2
Pics ! In the Action :
In the static :
Honda Civic ED7 1989,
I've a car since 2005, at first it was a daily drive but she quickly changed for the track day
I use it from time to time to go to work in good weather
Modification's list :
Motor :
Exhaust Megan Racing
Catback ZerofighteR
Aluminium Radiator Tegiwa
Swirlt pot Sard
Silicon Hoses Mishimoto
silicon Hoses Samco
Oil Radiator Mocal
Relocation Kit Mocal
Oil Catch Tank Cusco
Kevlar Power CHamber Tegiwa
Adm gasket Hondata
Drivetrain :
Clutch Kit Exedy Stage II
Flywheel Fidanza
FD 4.437
Quaife LSD
Extented short shift Home made
Chassis :
Coil Over Zenky Racing
Ressort Tein 18kg/16kg
Anti sway barSuspension Technique front/rear
C pillar No Name
Silent Bloc Energy Red
Camber kit rear D2
Toe Kit D2
Camber kit front Ingalls
Roll Center Adjuster J's Racing
Steerint Rack 2.83 Quaife
Traction Bar Innovative
Brake :
Kit Wilwood Dynalite front 280mm
Brake lines Wilwood front
Brake lines Goodridge rear
Servo brake and master cylinder EG6
DRear Disc OEM 260mm
Brake cylinder stopper Tegiwa
Interior :
Empty(lol)
Steering Wheel Oreca tulipage 90mm
Gear knob Razo
Gauge Greddy Oil Gearbox Temp
Gauge Stack Oil Pressure
Gauge Stack Pro Oil Temp
Gauge Stack Pro Control Water Temp
Alfano Fun Auto V2
Pics ! In the Action :
In the static :
Last edited by zenki on Wed Dec 28, 2011 9:04 pm, edited 1 time in total.
Re: Zenki's Civic ED7 Full Track Day
Its not the neatest of cars but i think it looks pretty bad A$$
Sits well low and its got loadz of battle scars
Sits well low and its got loadz of battle scars
White GL
Unique Edition
Re: Zenki's Civic ED7 Full Track Day
welcome to 4guk, really wonderful CIVIC
any pics of interior and videos in action ?
is gearing standard dohc d ?
any pics of interior and videos in action ?
is gearing standard dohc d ?
-
- Lvl3 Street Racer
- Posts: 379
- Joined: Sun Nov 25, 2007 5:29 pm
- Location: Limerick, Ireland
- Contact:
Re: Zenki's Civic ED7 Full Track Day
Great car love the Osaka JDM/Kanjo influences..
Is thet exhaust from zerofighter in Osaka Japan? Thought all the exhausts they make are straight through centre exit ones?
Is thet exhaust from zerofighter in Osaka Japan? Thought all the exhausts they make are straight through centre exit ones?
http://www.efcivicsedan.com" onclick="window.open(this.href);return false;
http://www.cr-x.org" onclick="window.open(this.href);return false;
Re: Zenki's Civic ED7 Full Track Day
Love that!!! Have you got any videos?
Like what you have done with the front wings!
Like what you have done with the front wings!
'90 B16B ED7! - SOLD
'96 Subaru Impreza WRX V-Limited
'96 Subaru Impreza WRX V-Limited
Re: Zenki's Civic ED7 Full Track Day
got more questions today what wheels are those (specs) and I suppose u set alligment to your specs, how do you like it ? if u can describe a little ..
i have same ed7 a9 and im preparing to start trackdays from next year so im interested
i have same ed7 a9 and im preparing to start trackdays from next year so im interested
Re: Zenki's Civic ED7 Full Track Day
C-Rex The exhaust "ZeroFighteR" is home made it's based on my old Buddy CLub Spec II
Now the exit is also on the center
maxis I've got 2 set for rims :
Team Dynamics 15X6,5 Offset 35 with Federal 595 RSR
Harry Hausen (no name) 15X6,5 Offset 35 with Toyo R888 GG
Totally with my spacer (17mm) my offset is 18, I like this !! The car is more directive, less lazy, it turns very well in the winding
The aligment to rapidly :
Front :
Camber : -4,6°
Toe : + 0.10°
Adjustable Tension Rod : 6°
Rear :
Camber : - 2,6°
Toe : + 0.25°
Anti sway bar is very hard
Movie on the track
http://youtu.be/llav49qVWRg
On 5min29 (The go pro is on the car of a friend)
http://youtu.be/tNQa1dEVTvY
http://www.youtube.com/watch?v=y4sU0z_XNmw
Now the exit is also on the center
maxis I've got 2 set for rims :
Team Dynamics 15X6,5 Offset 35 with Federal 595 RSR
Harry Hausen (no name) 15X6,5 Offset 35 with Toyo R888 GG
Totally with my spacer (17mm) my offset is 18, I like this !! The car is more directive, less lazy, it turns very well in the winding
The aligment to rapidly :
Front :
Camber : -4,6°
Toe : + 0.10°
Adjustable Tension Rod : 6°
Rear :
Camber : - 2,6°
Toe : + 0.25°
Anti sway bar is very hard
Movie on the track
http://youtu.be/llav49qVWRg
On 5min29 (The go pro is on the car of a friend)
http://youtu.be/tNQa1dEVTvY
http://www.youtube.com/watch?v=y4sU0z_XNmw
-
- Lvl3 Street Racer
- Posts: 379
- Joined: Sun Nov 25, 2007 5:29 pm
- Location: Limerick, Ireland
- Contact:
Re: Zenki's Civic ED7 Full Track Day
Ah I knew it didnt look like a ZeroFighteR in the pictures, looks good on it now..
It must be very loud we have one race track in Ireland in Ireland and they do not allow a Buddy Club spec 2 so no chance with one like you...
Any close up pictures of your modified wings/fenders?
And whats the rear diffuser off?
Great looking car
It must be very loud we have one race track in Ireland in Ireland and they do not allow a Buddy Club spec 2 so no chance with one like you...
Any close up pictures of your modified wings/fenders?
And whats the rear diffuser off?
Great looking car
http://www.efcivicsedan.com" onclick="window.open(this.href);return false;
http://www.cr-x.org" onclick="window.open(this.href);return false;
Re: Zenki's Civic ED7 Full Track Day
awesome man, i like those rims also how they look, very unique and fit civic well.
have you ever tryed running - 0.10° toe in front or 0.00° ? might be even better for cornering i'm thinking for myself
how about gears ? are they standard 1.6i-16 gears with 4.437 FD ? (it's what I use, very good).
ever been to dyno btw ? and thanks for videos, u might have some onboard too maybe ?
have you ever tryed running - 0.10° toe in front or 0.00° ? might be even better for cornering i'm thinking for myself
how about gears ? are they standard 1.6i-16 gears with 4.437 FD ? (it's what I use, very good).
ever been to dyno btw ? and thanks for videos, u might have some onboard too maybe ?
Re: Zenki's Civic ED7 Full Track Day
C-Rex Zerofighter, I like too, but it's like in Ireland, France, few circuit allows this exhaustor not at all , and the police do not like it at all
I have some pictures of the wings but here on, find in my hard drive ^^
The rear diffuser has a Renault Clio 3RS first generation
it has been modified of course, for fit in the rear bumper
maxis Thanks you very much !!
I run with front toe : -0.10° because it's a traction, in the acceleration, naturally the wheels are going to take the pinch therefore toe is 0°
For the gears it's standard 16i16 indeed, I wanted to Mfactory gears, third and fifth shorter, the fourth is the OEM third but FD 4.437 is very good
Camera inside soon ^^ I buy a Go Pro HD
I have some pictures of the wings but here on, find in my hard drive ^^
The rear diffuser has a Renault Clio 3RS first generation
it has been modified of course, for fit in the rear bumper
maxis Thanks you very much !!
I run with front toe : -0.10° because it's a traction, in the acceleration, naturally the wheels are going to take the pinch therefore toe is 0°
For the gears it's standard 16i16 indeed, I wanted to Mfactory gears, third and fifth shorter, the fourth is the OEM third but FD 4.437 is very good
Camera inside soon ^^ I buy a Go Pro HD
- sabvtivtec
- Lvl4 Nos Enhanced Poster
- Posts: 894
- Joined: Mon Nov 06, 2006 5:55 pm
Re: Zenki's Civic ED7 Full Track Day
Love it, it's a properly used 4g
Re: Zenki's Civic ED7 Full Track Day
BECAUSE RACE CAR!
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: Zenki's Civic ED7 Full Track Day
Great vids mate and I love the battle scars
Just wish we had a track where I live, we only have a 1/4 mile track
Just wish we had a track where I live, we only have a 1/4 mile track
Re: Zenki's Civic ED7 Full Track Day
Centre exit exhaust looks
Great vids and it sounds great
Great vids and it sounds great
White GL
Unique Edition