EF9 - SOLD

[Tahir]

Cheers man, sounds promising.

Im hoping the machine shop calls me tomorrow morning

Few other non-B20 bits that I will be taking care of:

Swap out the PAS steering rack as it has a leak
Change an inner cv boot on one of the shafts
Source and fit some more adjustable rear toe arms as the D2 ones on there are a bit rough
Source and swap out the master cylinder and servo for a 1" ITR one

Should be fun!

[LUCKY EE9]

looking good, cant wait to see this on the road.
i know theres a few others getting they cars ready too.
but this definately will be one of the best.

[Tahir]

NIce one Lucky, we all know who is gonna have the most "different" car!!

I got my block back, will update with pics later...

Gonna go out and have fun in some high comp B18 goodness

[Tahir]

Right, got the block back from W.Drake a few days ago.

Had the RS Machine 84.5mm pistons matched to the block, block has been bored 0.5mm and piston to wall gap set at 3 thou.

Block has been chemical washed, I will be attacking the exterior of it with a dremel and polishing/wire tool to get a nice clean surface.

Also had the block decked, 3 thou has been taken off resulting in a nice fresh surface and still keeping it safe on CR side of things, should be no more than 11.7:1, similar compression to Daz's race B20.






11.5:1 RS Machine 84.5mm cast pistons and Scat H Beam rods with ARP 2000's.



RS/Scat vs stock B20




More soon.....

[EE9 CVC]

Block will be sweet once you clean clean it up a bit more.



Some real nice parts there, those looks like some serious con rods, are they much heavier than the stock items?

[Marc_EE9]

Block will be sweet once you clean clean it up a bit more.

Some real nice parts there, those looks like some serious con rods, are they much heavier than the stock items?

x2

[Tahir]

They do seem quite heavier than the stock ones but i've not held the stock ones without the pistons. They will certainly be stronger than the poo stock ones that come with the even crapper rods bolts.

Block will come out looking better than new once im done with it

[SiR-CUE]

looking good.

[Oldskool J-EDM]

[Tahir]

Cheers Pete.

Im dying to have it done, will still be while yet I think.

[LUCKY EE9]

drakes well recommended used them plenty of times. cant wait to see it running. As always Tahirs car is one to watch. Theres currently a few civic being built at the moment so Tahir dont let us bradford boys down, show the way lad.

[SiR-CUE]

yes that right, theres defiantely some competition this year.
Especially Locally.. ,

, Good Luck too All.

[Tahir]

Should be a wee while till it's up and running as there is masses of stuff to be done yet.

All in good time though eh?

[civic ef999]

i'm sure some one using lucky account lol he not writing this

[LUCKY EE9]

i'm sure some one using lucky account lol he not writing this

What do you mean by some one using my account?? what do you think i cant wright!! or have no fingers to type!!