Adam's 3G GT! Update - "30/06/2010"
Bit of a bitter sweet update
After fitting the new water pump and timing belt I picked up my rocker cover from Marc (Cheers bud ) and put everything back together. I love the cover and think its looks spot on in there.
However the overheating problem was still there and the fan wasn't kicking in. I spent most of yesterday flushing and chasing leaks round all the hoses.
Finally made a breakthrough in the afternoon and checked the voltage on the fan switch. Plugged it back in and it all worked perfectly. Temperature gauge sitting at half way for a good half an hour. Fan kicking in and out, Happy Days
Then it happened....
My mate wanted to know what it was like underneath. I told him to have a look and pointed out the one bad bit I knew of underneath the drivers footwell. I explained about what Dave and others had said about the water sitting there, and decided to strip the interior out and have all the carpet up.
The more we pulled up the worse it got A few prods with a screwdriver went through in about 4 main areas. They are all round the edges, and I had a look to see how tricky it's going to be to cut bits out to plate up and it doesn't seem too bad.
Drivers Side Rear Footwell
Drivers Front Footwell
Passengers Front Footwell
Passengers Rear Footwell
Passengers Sill
I'm not that surprised.. it's 25 years old after all. I think I was just in denial and its hit home a bit now. I thought I had quite a bit to do still before I even knew about the rust. Feel a bit winded to be honest, but I will battle on..
After fitting the new water pump and timing belt I picked up my rocker cover from Marc (Cheers bud ) and put everything back together. I love the cover and think its looks spot on in there.
However the overheating problem was still there and the fan wasn't kicking in. I spent most of yesterday flushing and chasing leaks round all the hoses.
Finally made a breakthrough in the afternoon and checked the voltage on the fan switch. Plugged it back in and it all worked perfectly. Temperature gauge sitting at half way for a good half an hour. Fan kicking in and out, Happy Days
Then it happened....
My mate wanted to know what it was like underneath. I told him to have a look and pointed out the one bad bit I knew of underneath the drivers footwell. I explained about what Dave and others had said about the water sitting there, and decided to strip the interior out and have all the carpet up.
The more we pulled up the worse it got A few prods with a screwdriver went through in about 4 main areas. They are all round the edges, and I had a look to see how tricky it's going to be to cut bits out to plate up and it doesn't seem too bad.
Drivers Side Rear Footwell
Drivers Front Footwell
Passengers Front Footwell
Passengers Rear Footwell
Passengers Sill
I'm not that surprised.. it's 25 years old after all. I think I was just in denial and its hit home a bit now. I thought I had quite a bit to do still before I even knew about the rust. Feel a bit winded to be honest, but I will battle on..
let me find something for you Adam.
Take the front wings off and the panel surrounding the wiper arms and have a good look down there and inside the ledge that supports the sunroof. I also found that the A-pillers would go from the inside out.
Although all can be repaired
Sure you've seen these.
http://board.hondacrx.co.uk/phpBB2/view ... hp?t=55229
http://web.archive.org/web/200405110619 ... #A-pillars
I really HTH
Don't give up on the old girl! =)
Take the front wings off and the panel surrounding the wiper arms and have a good look down there and inside the ledge that supports the sunroof. I also found that the A-pillers would go from the inside out.
Although all can be repaired
Sure you've seen these.
http://board.hondacrx.co.uk/phpBB2/view ... hp?t=55229
http://web.archive.org/web/200405110619 ... #A-pillars
I really HTH
Don't give up on the old girl! =)
-
- **Trader**
- Posts: 956
- Joined: Tue Nov 20, 2007 6:36 pm
- Location: kendal cumbria
-
- **Trader**
- Posts: 112
- Joined: Tue Dec 14, 2010 10:18 pm
Re: Adam's 3G GT! Update - "30/06/2010"
Keep it up m8 looking Cool.
Re: Adam's 3G GT! Update - "30/06/2010"
Nice 3G..havent these got torsion bar type front suspension?
- JDM-mace
- Lvl2 Potential Hazard
- Posts: 235
- Joined: Sat Sep 05, 2009 10:07 am
- Location: kendal, cumbria
Re: Adam's 3G GT! Update - "30/06/2010"
yess lol great set up to be fair
civic EG-sold
FTO gpx-sold
civic sedan-wrote off
205 rallye-sold
civic 3G-present:D
civic 3G-scraped
FTO gpx-sold
civic sedan-wrote off
205 rallye-sold
civic 3G-present:D
civic 3G-scraped
Re: Adam's 3G GT! Update - "30/06/2010"
No recent updates on this?
Sick Civic VT OfTeN LiCkEd NeVeR bEaTeN
Re: Adam's 3G GT! Update - "30/06/2010"
Not been about.
Have just decided i'm going to finish it, will be going to make templates and cut out plates after work tonight!
Have just decided i'm going to finish it, will be going to make templates and cut out plates after work tonight!
Re: Adam's 3G GT! Update - "30/06/2010"
Crack on with it mate, will make a nice little summer ride
Sick Civic VT OfTeN LiCkEd NeVeR bEaTeN