Clipses' 1990 USDM Civic EX Sedan
Clipses' 1990 USDM Civic EX Sedan
Been on the website a couple weeks now and figured it's time to post up my build! Bought the car the same month I bought my brand new 09 VW Jetta GLI which was 2 years ago this month Car has come a LONG way since then, and is still under construction. Slowly but surely I am building it to my specifications to be a fun daily/weekend track warrior/slight show car. I'm trying to spice it up but mixing all 3 up, stirring up the pot, and see what the outcome is... On to the timeline!...
Picked her up, towed her home for a steal of a deal. Luckily I never tried starting the car, PO said it made noise, which had I turned it on, it'd have had a rod knock and probably broke a rod shortly after.
Next day...
Also began putting my black interior in IMMEDIATELY! Because the blue original interior was beat to crap and stained to hell and back.
Also installed GSR leather seats and center console
Just chillen after getting put back together... (for the most part )
Clearenced my cross member for my 4-1 header
Can anyone guess what my friend uses to pull motors? Let's find out if you guess right...
Just about ready, intake being like this is DANGEROUS!!!...
Tried starting it for the first time...
It was a FAIL... backfire like a mofo, come to find out someone plugged the wires in wrong at the dizzy....
Got it all right, and got it running, badly, but running...
DONE!!...
With my homie's 91 DX...
One of the last and only pics you will see with 90/91 tails... thumbsdown
After the proving drive to my families house 80 miles away one way... SHE PASSED along with my new car in the back ground
Then while I was up there with a few more tools at my disposal, got her running just right...
mmmmmm leather!...
Then went to a local meet and while going there I here this loud KA DUNK!!! DUNK ... DUNK ... DUNK ... tried figuring out what it was... come to find out the rear shock which should look like this...
happened to do this....
Got it fixed and after my homie seeing my car at that meet he wanted to run me so the next meet we did just that...
original video...
Car was running nicely, so I pulled it apart again!...
Ended up doing a wire tuck... also cleaned up my engine harness...
Made the A$$ look better as well! Before....
After...
Found a leak started from a broken stud as well ...
Reinforced my pedals...
continued work and cleaning stuff!
electronic vss going in
how I do my wiring!
Got my cluster in!
began prepping my spare door panels to get redone...
Picked up these babies!...
wire tuck about done!...
Polished up my lights...
Did some freshening up on my mouldings...
started getting the car put back together at this point...
picked up a custom 2.5" mandrel bent exhaust a local guy had on a turbo gsr 4 door!...
Got my wheels back from refinishing!...
Finally finished the car and took her to the annual ef meet with my buddy!...
Got my door panels back from my uncles shop...
HAHA!!!
work began on a custom one off traction bar...
Wasn't happy and actually still working on it...
picked up on these babies... circa 1992 ST sway bars when they USED TO BE blue...
painted them to new spec though since ps fluid ate at the powder coat on the front bar...
also picked up this stuff!...
chillin at work!....
Bunch of new ish koni yellows, gc's, skunk2 intake mani, blox 68mm tb, crower stage 2 cams, as well as installed new wheel bearings, arp extended studs, and lower ball joints, rebuilt manual steering rack, and rebuilt obd1 LS dizzy!!...
redid my harness and went obd1!!!
began my retrofit project...
back up and running..... AGAIN!... lolz
changed to a black vc...
last pic before being torn apart yet again...
then back apart AGAIN in prep for paint!!!
and how it CURRENTLY is sitting...
Here is a panel I test sprayed...
REFLECTION...
And for shits and giggles, here is a video of me just cruising through the canyons...
And while this baby is down I drive my other baby, because turbo is just tons of fun!!!
SUPER old pic, but haven't taken any recent pics since S*!t like a year or so now...
Feel free to leave comments and let me know what you think!!!
Picked her up, towed her home for a steal of a deal. Luckily I never tried starting the car, PO said it made noise, which had I turned it on, it'd have had a rod knock and probably broke a rod shortly after.
Next day...
Also began putting my black interior in IMMEDIATELY! Because the blue original interior was beat to crap and stained to hell and back.
Also installed GSR leather seats and center console
Just chillen after getting put back together... (for the most part )
Clearenced my cross member for my 4-1 header
Can anyone guess what my friend uses to pull motors? Let's find out if you guess right...
Just about ready, intake being like this is DANGEROUS!!!...
Tried starting it for the first time...
It was a FAIL... backfire like a mofo, come to find out someone plugged the wires in wrong at the dizzy....
Got it all right, and got it running, badly, but running...
DONE!!...
With my homie's 91 DX...
One of the last and only pics you will see with 90/91 tails... thumbsdown
After the proving drive to my families house 80 miles away one way... SHE PASSED along with my new car in the back ground
Then while I was up there with a few more tools at my disposal, got her running just right...
mmmmmm leather!...
Then went to a local meet and while going there I here this loud KA DUNK!!! DUNK ... DUNK ... DUNK ... tried figuring out what it was... come to find out the rear shock which should look like this...
happened to do this....
Got it fixed and after my homie seeing my car at that meet he wanted to run me so the next meet we did just that...
original video...
Car was running nicely, so I pulled it apart again!...
Ended up doing a wire tuck... also cleaned up my engine harness...
Made the A$$ look better as well! Before....
After...
Found a leak started from a broken stud as well ...
Reinforced my pedals...
continued work and cleaning stuff!
electronic vss going in
how I do my wiring!
Got my cluster in!
began prepping my spare door panels to get redone...
Picked up these babies!...
wire tuck about done!...
Polished up my lights...
Did some freshening up on my mouldings...
started getting the car put back together at this point...
picked up a custom 2.5" mandrel bent exhaust a local guy had on a turbo gsr 4 door!...
Got my wheels back from refinishing!...
Finally finished the car and took her to the annual ef meet with my buddy!...
Got my door panels back from my uncles shop...
HAHA!!!
work began on a custom one off traction bar...
Wasn't happy and actually still working on it...
picked up on these babies... circa 1992 ST sway bars when they USED TO BE blue...
painted them to new spec though since ps fluid ate at the powder coat on the front bar...
also picked up this stuff!...
chillin at work!....
Bunch of new ish koni yellows, gc's, skunk2 intake mani, blox 68mm tb, crower stage 2 cams, as well as installed new wheel bearings, arp extended studs, and lower ball joints, rebuilt manual steering rack, and rebuilt obd1 LS dizzy!!...
redid my harness and went obd1!!!
began my retrofit project...
back up and running..... AGAIN!... lolz
changed to a black vc...
last pic before being torn apart yet again...
then back apart AGAIN in prep for paint!!!
and how it CURRENTLY is sitting...
Here is a panel I test sprayed...
REFLECTION...
And for shits and giggles, here is a video of me just cruising through the canyons...
And while this baby is down I drive my other baby, because turbo is just tons of fun!!!
SUPER old pic, but haven't taken any recent pics since S*!t like a year or so now...
Feel free to leave comments and let me know what you think!!!
Last edited by clipsed on Tue Oct 19, 2010 3:21 pm, edited 2 times in total.
Thanks, and those are the types of roads and drives that I LOVE!!dida4g wrote:Very nice video.
Those roads always remind me of the movie DUEL.
Thanks, found only 2 repeats and fixed them, especially that suspension pic lolzMarc_VT wrote:couple of pictures have been repeated dude
nice thread though
so is it a B18A you have? and do you just have a 4WD gearknob or box as well?
Yes b18a1, and I wish it were a 4wd gearbox, just the knob lolz My hopeful goal is to one day mod the car to accept a 4wd box and all the components necessary for 4wd.
Thanks, it's much appreciated!Lee4391 wrote:Enjoyed reading that man. top work. Definitely gunna keep my eye on this one.
Thank You!!jonny f wrote:loving it! good work so far.
I'll update this as soon as I can, I ran out of primer the other day so just waiting on some extra cash to buy a full gallon instead of quarts of it... lolz
Thank you thank you! I will be VERY happy once I finish paint which should HOPEFULLY be completed by February at the rate I am going.walsh123 wrote:two years well spent mate, looks miles better then when you first got it.
Some impressive wiring aswell
Yes I started doing wiring at about age 13, still have a lot to learn, and I am still progressing, but I am VERY anal when it comes to wiring!
yes these are pre face lift usdm 88/89 sedan tail lights. I've been looking for some, but they are hard to find, and when I do find them they are actually decently priced, but always broke at the time! However I have found someone who I believe makes aftermarket ones as I always see them brand new and iirc they are like $80usd or something like that.