4th Generation Honda Civic Owners Club Main Forum.
K20A-EF9
Learner - Newbie
Posts: 10 Joined: Fri Dec 11, 2009 2:00 pm
Post
by K20A-EF9 » Tue Aug 10, 2010 4:08 pm
Looking for front upper and rear upper strut brace also maybe a front lower.....looking for tanabe sustec maybe any cheap sources in uk for them...any other suggestions appreciated for EF9....cheers
Tahir
Moderator
Posts: 12725 Joined: Mon May 30, 2005 6:04 pm
Location: Never too far.
Post
by Tahir » Tue Aug 10, 2010 5:01 pm
Cusco ones are decent, im rocking a few. Good quality.
2010 Audi A3 1.6TDi Sport
Marc_EE9
Moderator
Posts: 20137 Joined: Thu Dec 15, 2005 8:35 am
Location: Melbourne, VIC
Post
by Marc_EE9 » Tue Aug 10, 2010 5:13 pm
Cusco/Beaks/PasswordJDM
try 12tune.co.uk
gwenge
Lvl4 Nos Enhanced Poster
Posts: 979 Joined: Tue May 18, 2010 11:18 pm
Location: Essex
Post
by gwenge » Tue Aug 10, 2010 5:19 pm
Do the Password JDM ones fit? Heard they're for USDM cars and will hit our break master cylinders.... as they're essensially the wrong way round.
Marc_EE9
Moderator
Posts: 20137 Joined: Thu Dec 15, 2005 8:35 am
Location: Melbourne, VIC
Post
by Marc_EE9 » Tue Aug 10, 2010 5:24 pm
gwenge wrote: Do the Password JDM ones fit? Heard they're for USDM cars and will hit our break master cylinders.... as they're essensially the wrong way round.
not sure about fronts, but i have rear upper and its top notch
looks pretty too
gwenge
Lvl4 Nos Enhanced Poster
Posts: 979 Joined: Tue May 18, 2010 11:18 pm
Location: Essex
Post
by gwenge » Tue Aug 10, 2010 5:35 pm
agree'd, i'd love the front but not wasting money if it doesn't fit.
dida4g
Moderator
Posts: 5523 Joined: Thu May 13, 2004 12:11 pm
Location: Huddersfield
Post
by dida4g » Wed Aug 11, 2010 7:30 am
gwenge wrote: agree'd, i'd love the front but not wasting money if it doesn't fit.
Subject was already kinda covered earlier in the year for k20ef9.
forum/viewtopic.php?p=135278&highlight=#135278
I would go with the advice below,
K20A-EF9 wrote: ..might just make a custom one either will see
2000 CRV Camel Trophy Edition
2009 Kia Pro Ceed 3 1.6 crdi
Marc_EE9
Moderator
Posts: 20137 Joined: Thu Dec 15, 2005 8:35 am
Location: Melbourne, VIC
Post
by Marc_EE9 » Wed Aug 11, 2010 8:14 am
dida4g wrote: gwenge wrote: agree'd, i'd love the front but not wasting money if it doesn't fit.
Subject was already kinda covered earlier in the year for k20ef9.
forum/viewtopic.php?p=135278&highlight=#135278
I would go with the advice below,
K20A-EF9 wrote: ..might just make a custom one either will see
if you have the resources to make your own, its the way forward
K20A-EF9
Learner - Newbie
Posts: 10 Joined: Fri Dec 11, 2009 2:00 pm
Post
by K20A-EF9 » Wed Aug 11, 2010 11:14 am
dida4g wrote: gwenge wrote: agree'd, i'd love the front but not wasting money if it doesn't fit.
Subject was already kinda covered earlier in the year for k20ef9.
forum/viewtopic.php?p=135278&highlight=#135278
I would go with the advice below,
K20A-EF9 wrote: ..might just make a custom one either will see
thats me too man.......forgot my password so had to make this account....was looking to see what everones thoughts were from sources in uk as im aware of password jdm and yahoo auctions moj which I have been using.
Stew@12Tune
**Trader**
Posts: 287 Joined: Sun Mar 16, 2008 5:17 pm
Post
by Stew@12Tune » Fri Aug 20, 2010 7:42 pm
Just to step in, I'm an authorised dealer of password jdm and the fitment of the 3 points is something I'm looking into.
I will let you know what i find out
gwenge
Lvl4 Nos Enhanced Poster
Posts: 979 Joined: Tue May 18, 2010 11:18 pm
Location: Essex
Post
by gwenge » Sun Aug 22, 2010 8:43 pm
Ahh that's cool Stew. If they fit then i'd buy one... or if you could get password to build a reversed one
Be great to know if they do fit though!
Stew@12Tune
**Trader**
Posts: 287 Joined: Sun Mar 16, 2008 5:17 pm
Post
by Stew@12Tune » Sun Aug 22, 2010 8:51 pm
If it doesn't fit and there was high demand there might be a chance of getting them made, I had one on my EG and it was great, very lightweight
gwenge
Lvl4 Nos Enhanced Poster
Posts: 979 Joined: Tue May 18, 2010 11:18 pm
Location: Essex
Post
by gwenge » Sun Aug 22, 2010 9:07 pm
Where is 12tune based Stew? Tones of 4g goodies on your site i must say
I love the look of the password stuff, looks very well made and super strong. Nothing else like it which is why i want one! I don't want an adjustable type.....
would love a solid one like the password 3point.
Stew@12Tune
**Trader**
Posts: 287 Joined: Sun Mar 16, 2008 5:17 pm
Post
by Stew@12Tune » Sun Aug 22, 2010 9:13 pm
12tune are based in holland, I'm one of their dealers in the Uk, I can supply all of their items, usually with discounts.
My new site is
http://Www.9ktuning.com
Will be plenty of 4G stuff on there too soon
gwenge
Lvl4 Nos Enhanced Poster
Posts: 979 Joined: Tue May 18, 2010 11:18 pm
Location: Essex
Post
by gwenge » Fri Aug 27, 2010 10:14 pm
Ahh that's brilliant, look forward to your site getting up and running, good luck too mate