dc2 coilovers on ef?

example91 · Post by **example91** » Sat Sep 26, 2009 10:00 am

can this be be done? if so what do i need i.e. front forks, lca's?

if they do fit is there any benefits or drawbacks from putting dc2 suspesion on my ef?

thanks

paul

Post by **Marc_EE9** » Sat Sep 26, 2009 10:09 am

yeh they will fit

you just need the front forks from a DC2/EG, and the rear LCAs to make them loopeye

no disadvantages etc

Post by **Tahir** » Sat Sep 26, 2009 12:39 pm

Thats right, just need to get the right forks and the rear LCA's.

I have some import LCA's going if needs be

Post by **Gizmo** » Sat Sep 26, 2009 2:32 pm

I thought DC2 stuff made EF's sit high for some reason?

Post by **Tahir** » Sat Sep 26, 2009 4:35 pm

Well im sure the coilovers will take care of height, maybe wont be able to go as low as you could on an EG or DC2.

robrex · Post by **robrex** » Sat Sep 26, 2009 8:03 pm

any reason for choosing D2's?

theres much better suspension out there for the money in my eyes. personal opinion tho.

davidT · Post by **davidT** » Sat Sep 26, 2009 8:17 pm

dont think he means d2's. hes asking if integra dc2 coilovers will fit an ee/ef

robrex · Post by **robrex** » Sat Sep 26, 2009 8:55 pm

haha oops, just re-read that, my bad

Post by **NickD** » Sun Sep 27, 2009 7:42 am

Tahir wrote:Well im sure the coilovers will take care of height, maybe wont be able to go as low as you could on an EG or DC2.

This.

I'm getting fed up of writing it, must have answered this question over 50 times

K20-EF9 · Post by **K20-EF9** » Mon Dec 14, 2009 9:03 pm

dc2 coilovers wont allow the car sit as low as if you had proper ef coilovers....even at lowest level on set of tein dc2 coilovers i felt it was no way near as low as i needed so i just got proper set which did the job

oh and no need to change forks or lca's if you have jdm ef9 or any jap model

Post by **Tahir** » Tue Dec 15, 2009 12:12 am

Im 90% sure the front forks are different between EF9 and EG6.

EE9 CVC · Post by **EE9 CVC** » Tue Dec 15, 2009 12:22 am

Also, the spring rates may not be what you'd want for an EF.

Benny_d_man · Post by **Benny_d_man** » Wed Jun 08, 2011 11:22 pm

Im thinkin of doing this too. A set of cusco coilovers for a dc2. I have sourced a set of eg front forks for the job and my ef is a jap import so rear lca's are for eye type. Anyone else got info on this. Thanks

Post by **Marc_EE9** » Thu Jun 09, 2011 9:04 am

As EE9 CVC posted, the spring rates won't be right for a Civic EF, and DC2 shocks are longer than EFs', so it may be an odd right height, and maybe too stiff. Cusco coilovers are notoriously hard, in my experience.

Benny_d_man · Post by **Benny_d_man** » Thu Jun 09, 2011 9:09 pm

Yeah i am getting them cheap enough so may as well try them and find out. Even if they dont work out i can sell em on. Thanks for the info Marc

4GUK

dc2 coilovers on ef?

dc2 coilovers on ef?

Re: dc2 coilovers on ef?

Re: dc2 coilovers on ef?

Re: dc2 coilovers on ef?