4GUK

Honda Civic Forum - 4th Generation Civic Owners Club
It is currently Mon Oct 23, 2017 12:49 am

All times are UTC




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Wed Mar 11, 2015 12:02 pm 
Offline
Lvl4 Nos Enhanced Poster
Lvl4 Nos Enhanced Poster
User avatar

Joined: Mon May 07, 2012 8:19 pm
Posts: 856
I've decided to show the reason because of which there was no progress on my ED7.
Currently in my garage resides my sisters BA4 Prelude which needs a transplant.
The old B20A3 engine was burning excessive ammounts of oil and when she bought this car, there was a B20A9 engine sold with it.

Some pictures of the car..
Image

Image

So a month ago i started doing some work on it.. First i've decided to tear down the old engine because the condition of it was unknown.
Image

The previous owner of the Prelude only bought another car for parts and that's where he got this engine from only drove some 200 kilometers with it, so knowing the condition of the engine was impossible.
Image

Image

Then i started unhooking the engine bits.. So much vacuums on this damn carbie B20A3! :shock:
Image

The "new" block with a box 'o bits on top of it..
Image

That was the end of the day, a last sad look towards my ED7 and i left..
Image

Then i got hakosuka to help me bring the old engine out..
Image

One of the reasons this thing was using so much oil :lol:
Image

Then i started gutting the interior and getting out the old engine loom.
Image

Image

Image

Had to gut the entire interior because the loom goes in the weirdest of places.. Now all i gotta do is cut the old carbie loom off just behind the passenger side seat and splice in the new PGM-FI one. The rear part is the same, so no issues there. If i were to change it whole i'd spend another day or two just on that, which i find a huge waste of time.
Image

Last weekend i went to a friend to wash the block internals, only to find this inside the sump :x
Image

A trail of gold going all along the inside of the block..
Image

Well... feck!
Image

Image

The engine was dropped off at a shop that will rebuild the bottom end..
Image

Before knowing that though we cleaned the inside of a cylinder head because we only wanted to surface it and fix the valve seats then slap it back on the block..
Image

Next on the list is:
- splicing in a new PGM-FI loom
- make a fuel supply line
- change the engine tank for a PGM-FI one
- drop the head off to be refreshed
- assemble the engine and pray to god that it works :lol:

_________________
Image


Top
 Profile  
 
PostPosted: Wed Apr 15, 2015 8:21 am 
Offline
Lvl4 Nos Enhanced Poster
Lvl4 Nos Enhanced Poster
User avatar

Joined: Mon May 07, 2012 8:19 pm
Posts: 856
Not sure this is generating interest here, but i'll keep posting if anyone is interested :roll:

Placed back inside the engine loom.. This time the 2.0i version loom.
Image

Not sure why, but a part of this loom has a different mounting position on one part of it. Still have to fix the ripped out radio loom.
Image

Started splicing in the new loom to the old one because i couldn't be arsed to rip out the whole rear interior just to swap it.
Image

Image

Job done! :top:
Image

Also.. I found this inside the car :lol: The remains of mice that used to live in the car when it was parked for 6 years :lol:
Image

Started cleaning wheels to have them refurbished.
Image

Split in pieces..
Image

Mayhem after all the old silicone was removed. Whoever assembled these did a huge overkill on the silicone part :shock:
Image

Image

Wheels were then sandblasted and paint stripper used to remove the clearcoat on lips. All assembled back up and off to be straightened and polished! :top:
Image

We're going to pick up the block today. Head was skimmed, stem seals replaced and had valve seats fixed so that part is ready. All we need now is a fuel line, belts, water pump, filters and oil. All of that should be here by friday, so hopefully the engine will be placed inside the engine bay this weekend.

_________________
Image


Top
 Profile  
 
PostPosted: Tue Apr 21, 2015 6:57 pm 
Offline
Lvl7! Post Whore y0!
Lvl7! Post Whore y0!

Joined: Thu Dec 03, 2009 10:17 am
Posts: 2045
Location: Cardiff
Awesome had a BA myself with the b20a7
Lovely motor and so much fun to drive, I love 4ws!

_________________
White ED7 - sold
Black EE9 - Rust can
Red EC9 - Rust can
Black ED7 - Written off
Superior blue ED2 - Sold
Black CRX EF6 Glassroof - in the making


Top
 Profile  
 
PostPosted: Wed Apr 22, 2015 5:26 am 
Offline
Lvl4 Nos Enhanced Poster
Lvl4 Nos Enhanced Poster
User avatar

Joined: Mon May 07, 2012 8:19 pm
Posts: 856
They are fun to drive, yes. But a huge pain in the A$$ to wrench. So many things overcomplicated unlike on our 4gen Civics..

I don't know what they were thinking with half the stuff they did on these Preludes :roll:
Hoping i get the water pump and timing belt today so i can prep the engine for swapping! :top:

_________________
Image


Top
 Profile  
 
PostPosted: Tue Jun 30, 2015 6:42 am 
Offline
Lvl4 Nos Enhanced Poster
Lvl4 Nos Enhanced Poster
User avatar

Joined: Mon May 07, 2012 8:19 pm
Posts: 856
This has been completed but i'll post pictures for those that want to see the progress :-)

Rebuilt bottom end picked up..
Image

Resurfaced head also picked up..
Image

Block and head mated together after a long time :top:
Image

I've made a quick oil seal install tool at work and it turned out great!
Image

The current metal water pipe was corroded beyond recognition..
Image

..so it was soda blasted :lol:
Image

Then i finally got the timing belt kit so i could assemble the engine together again!
Image

Mated the transmission and everything else back on and that was it for the day :top:
Image

It was 11pm by the time we were done so we've put the engine inside the garage and called it a day.
Image

Next day there were some finishing touches done to it and then the engine went inside without an issue 8)
Image

Rembember the old wheels?
Image

Polished lips, painted centers and new bolts..
Image

Wheels reassembled :top:
Image

New fuel pipes on the gas tank
Image

Back up :top:
Image

Gauges and dash back in..
Image

Fully rebuilt interior 8)
Image

Started to rebuild the front end
Image

Had a lunch break on the new engine :lol:
Image

Aaaaaand done!
Image

First time she "saw" the world this year :lol:
Image

And a bonus video of the first start :top:

_________________
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group