See Link - http://img87.imageshack.us/img87/1255/p1070475vu1.jpg" onclick="window.open(this.href);return false;
For Carbs, See Below.
RED - Switched 12v Positive Feed (Fusebox)
BLACK - GROUND
GREEN - RPM Signal (Either direct from Dizzy or the Back of the Rev Counter)
GRAY - VTEC Solenoid (To the signal green wire from the Solenoid)
YELLOW - GROUND
its REAL easy to figure out, But here it is for the people who don't want to use their brains...
Before you ask about the RPM Signal - You will have to find that yourself! Either direct to the POSITIVE side of the Distributer power supply plug. If you try from the Guage Cluster for a cleaner install, you will have to find the pin out yourself, either by using a Multi-meter, or de-pining a pin at a time until the Rev counter stops working.
so no more bloody PM's, PLEASE!!!!!
How To - VCON for Carbed Mini Me
How To - VCON for Carbed Mini Me
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: How To - VCON for Carbed Mini Me
Pm'd
1990 Civic VT Daily
1991 civic GL (track toy)
1991 Shuttle (To be "sensible" daily project)
Re: How To - VCON for Carbed Mini Me
Banned
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: How To - VCON for Carbed Mini Me
Account reactivated
1990 Civic VT Daily
1991 civic GL (track toy)
1991 Shuttle (To be "sensible" daily project)