How-To - Fit an OMEX Rev Limiter/ Launch Control On Carbs
-
- Lvl1 Newbie
- Posts: 58
- Joined: Fri Feb 04, 2011 2:45 pm
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
Hi everyone, i wonder, maybe i could my self make a launch controler... all i need is wiring schematics in the black box, when i know what i need i probadly could build my own. i just can't find it anywhere. Can someone help me?
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
your on your own on that one! you can pick one up second hand cheap
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
To bump this...
I bought an OMEX recently, lad said it was a single coil, but it's a twin coil version. You've said the twin coil will NOT work correct?
Now, looking at the wiring diagrams, basic as they are, the blue(s) coming from the omex that goes to the coil - looks to be one and the same. IE on the single coil it's a single blue wire from the omex unit, where as on the twin coil it's two, but there is nothing to differentiate them from each other, suggesting that are both exactly the same in terms of where they are terminated inside the unit. (just a ground)
So, if this is correct, you can either use one or the other, or twist them together if you wish and use the twin coil version as a single coil unit.
Unless they are actually independent wires and do different jobs? In which case they should have some identifier on so as not to get the wire going to coil 1, and coil2 mixed up.
Can anyone clarify that they are different? I'd wager them not.
I bought an OMEX recently, lad said it was a single coil, but it's a twin coil version. You've said the twin coil will NOT work correct?
Now, looking at the wiring diagrams, basic as they are, the blue(s) coming from the omex that goes to the coil - looks to be one and the same. IE on the single coil it's a single blue wire from the omex unit, where as on the twin coil it's two, but there is nothing to differentiate them from each other, suggesting that are both exactly the same in terms of where they are terminated inside the unit. (just a ground)
So, if this is correct, you can either use one or the other, or twist them together if you wish and use the twin coil version as a single coil unit.
Unless they are actually independent wires and do different jobs? In which case they should have some identifier on so as not to get the wire going to coil 1, and coil2 mixed up.
Can anyone clarify that they are different? I'd wager them not.
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
I cant say - I did think the same but didnt want to take a gamble!
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
I think I'll give Omex a ring and see if they can confirm. I'm doubtful they'll want to give out information like that however. If they don't I'll try source some info online, may have to resort to some multi meter investigation.
I'll update this thread when I come round to installing it.
Good guide as always by the way.
I'll update this thread when I come round to installing it.
Good guide as always by the way.
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
can anyone tell me if this will work on a d16z6 please
or will it only work on a carb car
or will it only work on a carb car
grinch
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
also interested in getting one for my d16a9
no reason it shouldnt work
no reason it shouldnt work
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
i always tought it was only for carb dizzys cant find any info abouy fitting it to a injection civic
grinch
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
seen them on loads of zs fiestas and 106 gti's
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
ya me too there was a local lad had one on his zetec fiesta
theres noting on google about fitting to honda
theres noting on google about fitting to honda
grinch
-
- Lvl2 Potential Hazard
- Posts: 146
- Joined: Sat Oct 29, 2011 12:31 pm
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
Would you recommend one of these gizmo. Do you think you can get of the line quicker with the launch control?
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
Concept is the same for ALL cars.
Rememeber you NEED a single coil
Rememeber you NEED a single coil
1988 RT4WD Shuttle - Supercharged, VTEC Swapped Track Toy.
1988 RT4WD Shuttle - Lifted Daily Beater.
1988 RT4WD Shuttle - Lifted Daily Beater.
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
To clarify when fitting this to a fuel injected honda the process is precisely the same as Eden has walked you through ....
Enjoy
Enjoy
In the league of ultimate procs
Re: How-To - Fit an OMEX Rev Limiter/ Launch Control On Carb
grinch wrote:ya me too there was a local lad had one on his zetec fiesta
theres noting on google about fitting to honda
Should have quoted you in the last post
In the league of ultimate procs