4GUK

I've got a very mysterious set of hubs that come with VT calipers and 262 but the the wheel flanges are too small for the bearings that fit the hubs. And the other bearings that fit the wheel flanges are too small for the hubs. So I am currently at a loss to what I have. Unfortunately the mechanic d...

and they're not the same there are 2 different types of wheel bearing iD is slightly smaller on one but I know sim auto have them both. Some VT and eg bearings have the same ID 42mm (ithink) My wheel flanges didn't fit as their diameter was too small. also just seen how old this post is......

Love the thread! Am going to change carbs but it just looks daunting so many hoses and I don't know what the feck they do!?!?!

Where's the best place to get them? Looking at poly as mine are fecked!! And I need shifter ones too. Thanks again

Cheers guys much appreciated

Ah, thanks ernie. So if the springs lower it 50mm just keep it on top ones?

seat leon cupra r front lip

nortth or south Ireland?

:top: :top: :top: Been stuck for a wheel bearing and no one knew that there was 2 different types except for these guys. Saved me a fortune and a lot of headache. Bearing was half the price of local motor factors and arrived quickly. Thanks guys and I'll be using you again! Cheers Giz for the heads ...

I am fitting Koni shocks but there are 2 settings for the perch. Which ones do I use?

I'm in the same boat and going for GL TRE's is it 2mm or 3mm?

if it's just the upper ball joint as opposed to the whole arm, I bought a pair from crx uk. Seem to be available as the upper arms are feckin dear! only problem I've had with them is the socket where it fits into the arm has become worn and now needs whole arm replacing. In fact ebay

Turns out they 'could' be DA hubs. Discs are260mm Pain in the arse not knowing, bloody second hand parts

Hi after closer inspection of my origially thought of crx vft hubs I have found out that they are not nor are they 4g hubs either as crx and 4g bearings are 78x42mm and 4g are 72x38mm and my problem is I need 2 front bearings. I've had a look and the closest I can get is on an american site saying t...

honest answer. my problem is that the centre of the hub is loose within the bearing. any ideas? differrent hubs? or just wrong bearings?